|
Air Dryersnnn Air Ozone TreatmentnnnOzonatorsnnnParts
Complete Ozone Water Treatment SystemsnnUndersink Ozone Units Filter Tanks & Control ValvesnnnFiltration (Media & Cartridges) Flood Stop nnnOzone Pump Parts nnnGas Release Valves (Flood Prevention)nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn |
Parts
Page Navigation Index:
• Parts - Ozonators
• Parts - Check Valves
• Parts - Tank Filling Vac Funnel
• Parts - Ozone Pump Rebuild & Tool Kit
• Parts - Whole House Chlorine Tatse & Odor Removal
Ozonators
D = Dimmer: For ozonators, 120 vac, pre 2002; all 220 vac.
R = Resistor: For ozonators, 120 vac only, 2002 on.
400*/S5
270*/S1
Gpvc = Generator (old style) S5 (7.5” long), pre 1999.
Generator (old style) S1 (11.5” long, or 2-7.5” long), pre 1999
discontinued, Replace with: SS10 + R270*.
SS10 = Generator, S1 (11.5” long), 1999 on, includes a pvc shield.
SS6 = Generator, S5 (7.5” long), 1999 on, includes a pvc shield
Check Valves
TxB: Connects to the Ozone Pump.
BxB: Connects to the tubing on both sides.
BxT: Connects to the water line.
TxB BxB BxT
Tank Filling Vac Funnel
Make loading any type of media into most any tank quick
and easy with the Vac-u-Funnel.
It’s as easy as:
• Place the Vac-u-Funnel on the tank.
• Connect the vacuum and turn on.
• Pour the media into the Vac-u-Funnel.
The Vac-u-Funnel will suck the media into the tank faster than you can pour.
Even wet/damp media gets sucked in like it was dry. Cation and Anion media will go in faster than you can pour.
SAVES:
• Time
• Frustration
• Money
Ozone Pump Puller Kit
Spacer Puller Hex Wrenches
The Puller Tool Kit has been designed to make Ozone Pump
rebuilding quick & easy.
The Puller removes the Fan and Piston Bearing quickly and with ease.
The Spacer tool ensures perfect Piston placement every time.
The Hex wrenches are the proper size and heavy duty.
The Puller Tool Kit also comes with step-by-step photo instructions.
Ozone Pump Puller Kit Contents:
Piston Position Spacer
Puller
5/32 Piston Hex Wrench
1/8 Piston Bearing
Hex Wrench
Puller in place removing the fan. Simply twist the
Tee handle and the parts slide out.
Spacer is placed in the front of the Ozone Pump.
It ensures perfect piston placement and long piston
Ozone Pump Rebuild Kit Contents:
Piston
Sleeve
Plate (includes: flappers, o-ring)
Whole House Chlorine Taste, Odor & Color Removal
Ozone Pure Water has many systems that eliminate water
problems such as:
• Iron
• Sulfur
• Manganese
• Color
• Chemical chlorine taste and odor
• Hazardous chemical by-products
Whole House Treatment System:
GAC4 Filter: 7.5” x 22”, wall mounted, 1” mpt inlet/outlet.
This filter will remove up to 5 ppm chlorine for over 100,000 gallons.
This equates to typically a once per year change.
The GAC4 can also remove up to 2 ppm of Tannic Acid.
|
||